Trio-E:

Energy Efficient Steel Stiffened Door

.
According to data from the Spray Polyurethane Foam Alliance, doors represent 11% of the overall leakage in a building.  When the Trio-E from CECO is combined with thermally broken frames and thresholds, it becomes a sustainable building solution that can eliminate infiltration and exfiltration in the door opening and guarantee that the building envelope is tightly sealed, even in the harshest environment.
.

The new Trio-E door is steel stiffened for strength, but achieved an operable U-Factor of 0.29, which is 50% better than other steel stiffened doors currently available on the market today. Most doors on the market use calculated testing to achieve their U values. Trio-E has been tested for operable performance under ASTM E1363 for thermal transmittance, easily exceeding the requirements of AHRAE 90.1-2007 and 189.1 for the Design of High-Performance Green Buildings.

Trio-E doors installed with Thermal Break frames from ASSA ABLOY Group Brands and Pemko Thermal Barrier Saddles help increase thermal retention and reduce energy leakage. Trio-E has been certified to CA0130, California Section 01350. Trio E is also certified to UL ISR 102, Sustainability Requirements for Door Leafs, as Silver. This will assist LEED Pilot Credit 43.

.
Additionally, the GREENGUARD Environmental Institute recently announced that ASSA ABLOY Group brands CECO, CURRIES, GRAHAM and MAIMAN achieved both GREENGUARD Indoor Air Quality Certification and GREENGUARD Children & Schools Certification.

.

Green/Energy Efficient Factors:
• Lowest operable U-Factor in the industry for a steel stiffened door (U-Factor 0.29)
• High recycled steel content for LEED points up to 57.1%
• Injected polyurethane foam for superior insulation and energy efficiency
• Trio-E assists with these additional LEED Credits:
. - MRc4: Recycled Content - best in class at over 50%
. - MRc5: Regional Material CI
. - IEQc4.6: Low-Emitting Materials - Ceiling & Wall Partitions - tested to CA 01350 (doors are an integral part of ceiling and wall partitions and when they contact the interior envelope, they need to meet 01350 requirements - LEED S HC R
. - Pilot Credit 43 -

www.ASSAABLOYDSS.com